Home  /  Locations  /  Karnataka  /  Karwar  /  Premium Aluminium Windows

Premium aluminium windows for Karwar's wet, humid coast

AluK casement and sliding windows chosen for 72 to 86% humidity, sideways monsoon rain and long hours of open ventilation. For new homes, villas and replacement of old timber frames.

Windows that work in 72 to 86% humidity

Karwar’s year is a long wet season followed by warm, humid months. Relative humidity averages 72% and climbs to 86% in July and August, while summer temperatures sit around 27 to 34 C and occasionally touch 38 C. A window here is opened for air far more often than it is closed against cold.
That changes the brief. You want a sash that presses shut against sideways rain and a frame that will not swell or stain. You also need a way to keep insects out when the window stays open. Our premium aluminium windows range is built around those points for homes across the Karwar area.

Which AluK window configuration suits Karwar

The AluK Infineo casement (C87K-CS NI) uses ultra-slim 65 mm profiles with a hidden sash, side-hung single or double sashes that open outward, multi-point locking and glass up to 32 mm. Its standard sash is 800 x 1,800 mm, so it suits tall, narrow openings.
For ordinary homes there are lighter and more economical casement lines. The 45DS offers inward or outward opening in casement and tilt-turn forms. The 56IW is a 56 mm thermally broken system that AluK positions for refurbishing older windows. The 67IW adds a 67 mm thermal break and an RC2 burglary class with multi-point locking. Where you want a wider opening, SC45 sliding windows are available with a built-in mosquito frame.

Look inside the frame

Cut sections of AluK systems show what you are actually buying: chamber layout, glazing pocket, track and threshold.

67IW thermally broken casement

A 67 mm thermally broken series for high thermal and acoustic performance, with burglary class RC2. AluK recommends it for replacing old wooden and PVC windows.
AluK C87K-CS NI Minimal Infineo casement cross section

C87K-CS NI Minimal Infineo casement

Minimal casement with a 65 mm sightline and hidden sash, built into masonry. Open-out single or double sash.

Four considerations for windows on the Karwar coast

Casement or sliding, room by room

A sliding window opens half its width; a casement opens fully, which matters when you rely on a breeze at 86% humidity. Use casements in bedrooms and bathrooms and sliding windows where a wide, low sill or a balcony leaves no space for a sash to swing.

Outward-opening sashes and monsoon wind

An outward sash is pushed onto its seals by wind when closed, but is exposed when left ajar in a gale. Ask for friction stays or restrictors and decide which windows you will leave open in June. That choice affects the window type you buy.

The wall junction, not the glass

Water usually enters at the joint between frame and masonry. Ask how the frame is fixed and sealed, and whether the sill slopes away. On houses close to the Kali estuary, a sealed junction matters more than a heavier frame.

Insects and ventilation

Karwar’s humidity and rain mean windows stay open for air through the evening. Ask for built-in flyscreens or mosquito frames at quotation stage; AluK’s SC45, SC40 and S115NI sliding lines list integrated screen options, and retrofitting is harder.

How to decide: casement, sliding, fixed or slimline

Most Karwar houses end up with a mix. A short rule for each opening saves you from specifying one window type for the whole building. Use the criteria below, then confirm each against its position and exposure at measurement.
If you are replacing frames in an older house, the renovation guidance explains what changes in the wall and what does not.

From room list to installed windows

Make a room-wise window list

Note each opening, rough width and height, floor level and which way it faces. A phone photo of each wall helps. Send it through the quote form, or call +91 73497 73851.

Choose systems at the showroom or by call

The Belagavi showroom shows casement and sliding systems at full size so you can feel the handle and the closing action. Phone and drawing review works when travel is hard.

Site measurement, arranged per project

We do not have a Karwar office. Measurement visits are arranged per project, so confirm coverage first. Sizes are taken from finished openings.

Fabrication and delivery

Certified AluK Home partners fabricate to your measured sizes. The quote lists system, finish, glass and hardware so nothing is substituted.

Installation and handover

Frames are fixed and sealed, then checked for closing, locks and drainage. You receive cleaning guidance for the wet months.

What to check before you order windows

Ask for the system and its datasheet

Ask the supplier to name the series for every window type and to supply the published data sheet. A system window is designed and tested as a whole; a locally assembled window depends more on the fabricator.

Ask about glass and safety

For low windows, doors with side lights and large panes, ask for the glass build-up and whether it is safety glass under IS 2553 (Part 1). Thickness and type affect safety, noise and cost more than the frame does.

Ask who is responsible after handover

Ask in writing who attends to leaks, a stiff handle or a seal after installation, and how quickly. Also ask how the product relates to IS 1948:2024, the current Indian standard for aluminium framed doors, windows and sliders.

FAQ

Windows in Karwar: common questions

What we can say, and what we would need to measure.
Casement windows with multi-point locking and a sealed wall junction work well for bedrooms, with sliding windows for wide openings. Ask for a finish suited to aggressive environments, coated or stainless hardware and a drainage detail. The best choice depends on exposure, which we confirm at measurement.
A well-fitted system window presses its seals shut under wind pressure and drains water that reaches the frame. Rattling and leaks usually trace to a poor fit, worn rollers or blocked weep holes. Ask for a handover check and clean the drains before each monsoon.
Often yes. The old frame is removed and a new aluminium frame is fitted into the opening, sometimes with a trim to cover any mismatch. AluK positions the 56IW for refurbishing older windows. We confirm at measurement, because wall condition varies.
AluK says soapy water is enough, as our window maintenance guide also explains. In a coastal setting, add a fresh-water rinse of frames and tracks regularly to remove salt, and clear the weep holes before June. Avoid harsh chemicals or abrasive pads that scratch the finish.
Some AluK sliding lines (SC45, SC40, S115NI) offer integrated screens, and folding doors list optional flyscreens. For casements, ask at quotation how a screen will be fitted. Do not leave it for later, as retrofits can be awkward.
The AluK Home Experience Center by Gruns Fenster is in Tilakwadi, Belagavi, with full-size systems to operate. We have no Karwar showroom, so plan a visit or discuss the options by phone and drawings first. Call +91 89704 69999.

More in Karwar and beyond

Premium Aluminium Windows overview

Product page with full detail.

AluK Infineo casement system

System specifications and guidance.

All of Karwar

Our service overview for this area.

Aluminium Sliding Doors in Karwar

Related product page.

Keep reading

Premium aluminium windows in Belagavi

Same system, different local conditions.

Premium aluminium windows in Hubballi-Dharwad

Same system, different local conditions.

Premium aluminium windows in Goa

Same system, different local conditions.

Window Glass Options

Guide

Send your window list and get a written specification

Call +91 89704 69999 or request a quote with room sizes and wall photos from your Karwar site.